Home
>
How to do
>
How To Fix The Error “System Thread Exception Not Handled” On Windows

How To Fix The Error “System Thread Exception Not Handled” On Windows

Written by Mr Jhon

The “SYSTEM_THREAD_EXCEPTION_NOT_HANDLED” fault befalls on Windows 8 and 10 running systems. Some users obtain this problem notification while Windows is starting, whenever others may not even begin the working system and instantly get this fault message.

The most probable origin of the “SYSTEM_THREAD_EXCEPTION_NOT_HANDLED” fault is driver failure. A simple reboot is usually not enough to resolve the problem, and this can result in an infinite restarting loop, which makes it unmanageable to handle the Windows running system. In most cases, computers are inadequate to transfer and collect data accurately without drivers. If the accurate driver is not installed, the project may not operate correctly

If you undergo “SYSTEM_THREAD_EXCEPTION_NOT_HANDLED,” drive the Windows Automatic Repair. To begin the computer in Automatic Repair form, you have to prevent the normal boot process three times in series: apply the Reset or Power key on a Windows 10 PC to check it during the boot stage and before it stops filling the working system. Suppose you are using the Power button, then you may necessitate keeping it pressed for at least four seconds to apply the power-off state. You may notice a screen notifying you that the running system is “Preparing Automatic Repair” and then “Diagnosing your PC.”

The following methods will help you to resolve the issue.

Resolve the error using third-party software
Run Command Prompt Commands
Install the latest graphics drivers
Launch Startup Repair
Run the BSOD Troubleshooter
Use a Restore Point
Remove The Battery

Table of Contents

Resolve the error using third-party software

The blue screen may alarm you a little bit if you are not familiar with such failures. System thread exception not handled is not a very popular one but can solidify it. But you can make this the difficult way, by squeezing the system yourself or by utilizing a quick solution that automatically removes this kind of fault in only a few seconds.

An online database provides Restoro highlights the newest working system data for Windows PCs, enabling you to replace any parts that may create a BSoD problem. This software can also serve you by performing a restore point before starting the improvements, allowing you to replace the earlier variant of your system if something works incorrectly.

You can repair registry flaws using Restoro:

Download and install Restoro.
Install the application.
Ready for the software to know stability problems and probably damaged files.
Press Start Repair.
Reboot your PC for all the settings to get the effect.

After that, your PC will run without difficulties, and you may not have to bother about BSoD failures or late response times regularly again.

Run Command Prompt Commands

Run System File Checker using Command Prompt(SFC), a service in Windows that enables users to browse for corruptions in Windows system files and replace them. This agent must be able to correct the query if any driver records are damaged. This guidance explains controlling the System File Checker tool (SFC.exe) to examine system files and fix any removed or damaged ones.

Windows may not operate as expected while a Windows Resource Protection (WRP) file is dropping or damaged. For example, some Windows functions must not work, or Windows could smash. The “SFC /scan now /offbootdir=c: /offwindir=c:windows” choice is one of many specific switches possible with the SFC command, the Command Prompt request managed to operate System File Checker. To operate System File Checker outside Windows, add the Automatic Repair/Advanced startup screen by understanding the directions discussed above.

choose the “Troubleshoot” option.

Choose “Advanced options“.
Select the “Command Prompt”
Type the “sfc /scannow /offbootdir=c: /offwindir=c:windows” command
Press Enter to execute it.

Type the “bcdedit /set {default} bootmenupolicy legacy” command
Then press Enter to execute it.

Close the Command Prompt.
Now, restart the computer.

Install the latest graphics drivers

Problematic graphics driver causes the System thread exception not handled the problem, and the first simple extract is to refresh it. But, it’s not that easy to perform it manually, then everything could become even more dangerous if you take the wrong driver. That’s why it’s more reliable and more durable to use graphics drivers that may refresh your drivers automatically.

Launch Startup Repair

Initially, you have to install a Windows 10 boot disk into your CD/DVD drive.
Restart your Windows 10 device.
Then restart the running system, and your system may go straight to the bootable disk.
You may see the Windows Settings screen in front of you.
Tap on the Next button located on the below side of the screen.

Then tap on the Repair your system features from the lower side of the screen.
You have to left-click Troubleshoot feature in the Choose an option window
Tap the Advanced options
Touch on the Command Prompt feature.
When you see the Command prompt window type C: then press Enter.
Write the following in the command prompt window and press Enter.

BCDEDIT /SET {DEFAULT} BOOTMENUPOLICY LEGACY

Type Exit
Press Enter to leave the command prompt window.
Then tap on Continue.
Restart your Windows 10 device.

Run the BSOD Troubleshooter

On Windows computers, BSOD failures are pretty familiar. Microsoft has added a very valuable Blue Screen troubleshooter on the Settings page.

As its title intimates, you can immediately operate Blue Screen of Death faults with the cooperation of this agent.

Start and select Settings
Then click on Update & Security
Select Troubleshoot
Now Run the Blue Screen troubleshooter.

Use a Restore Point

Try repairing your computer to an old working position by using System Restore if the difficulty continues. This requires you to install an image of your OS before you have any problems with it.

Remove The Battery

If you get the error “SYSTEM THREAD EXCEPTION NOT HANDLED“ on a system, then try an easy way that may protect you from the case of more complex solutions: normally remove the battery. You have to switch off the computer and then eliminate the battery from the laptop. Unplug the system from the power source and drop it in this position for a few minutes. Hold the power button and put it pressed for about 10 seconds. Then loosen the power button and plug the system into a power source.

You have to keep the battery expelled and switch on the laptop without it. Windows may start easily and check the “System thread exception not handled “ from recurring. Turn off the computer after starting the windows and unplug it from the power source, and refill the battery. You will be able to utilize the computer and Windows running system without difficulties.